RF1665CI Softener assy w/o media 16×65, 1″ CI valve

Set of equipment

CI 1″ control valve ¹

^‍Pressure tank 16×65, 2,5″ ²

Brine tank ³

           ¹ CI 1″ valve assembly (V1CIDM):

• CI 1″ control valve
• Top stack distributor, 11 segments
• Connection kit 1”
• Power supply
• Injector, DLFC – for Ecomix and cation exchange resin
• Funnel
• Valve instruction manual, instruction manual

             ² Pressure tank assembly

• Pressure tank 16×65, 2,5″
• Riser
• Bottom stack distributor

             ³ Brine tank assenbly

• Brine tank 18×36, 146 L
• Brine well assembly (brine valve, overflow set)

CI CONTROL VALVE KEY FEATURES

• ‍Regeneration control by water volume: delayed regen, immediate, both
• Possibility to change the cycle of regeneration stages and their range of time
• Program in ppm, French degrees, German degrees, or cubic meters
• Stores system configuration and operation data in nonvolatile memory

        Different setting modes are available:

– Twin or duplex configurations

– Up to 6 systems to the system controller

SPECIFICATIONS

• Water flow rate*

– Service (pressure drop 1 bar) – 6,0 m³/h

– Backwash (pressure drop 1,7 bar) – 6,0 m³/h

• Inlet, outlet – G 1″
• Drine – G 1″
• Brine line – G 3/8″
• Operating pressure – 2-6 bar
• Operating temperature +4…+30 ^oC
• Electrical requirements – 230 V, 50 Hz
• Electrical power – 30 W
• Volume of pressure tank – 183 L
• Volume of brine tank – 146 L
• The volume of the rounded side – 10 L
• Dry system weight – 28 kg

* Only for Clack WS1 CI control valves includes meter, bypass, and 1″ fitting kit

RECOMMENDED MEDIA VOLUME

• Ecomix Type C filter media – 100 L
• Ecomix Type A filter media – 100 L
• Ecomix Type P filter media – 100 L
• HCRS-S Strong acid cation exchange resin – 125 L
• PC002 Strong acid cation exchange resin – 125 L

The volume of filter material depends on the its characteristics. TDS on filter materials can be found on the official website www.ecosoft.com

ACCESSORIES**

• V3006 WS1 Bypass Assembly
• V3009 WS1 Auxiliary Microswitch Assembly
• V3070FM Bypass shut-off valve during regeneration (no-Bypass valve) for 1″ and 1.25″ systems
• V3069MM-01 Water Specialist 1” & 1.25” Motorized Alternating Valve
• V3191-01 WS1 Bypass Vertical Adapter Assy

** Not included in the basic set. Can installed as additional equipment.