Dosing pump kits

KODI: D100660

EMEC FACO basic dosing pump set, 60 L

Parametrat

Kapaciteti depërtues

Rikthimi

%

Maximum TDS

mg/L

Kërkesa për rrjedhje ndikuese

m³/h

Presioni operimit

bar

Konsumi i energjisë

kw

Parametrat

name

mm

EMEC FACO basic dosing pump set is intended for dosing of water solutions of chemical reagents used in water treatment for pH adjustment and reduction of water corrosive activity. It might be also used for special-purpose reagents, including antiscalants and biocides.

Tiparet kryesore

  • Simple and reliable design (solenoid pump)
  • Built-in electrical protection against power surges and overvoltage
  • Good chemical resistance against broad range of chemicals
  • High accuracy with low flow rates
  • Continuous chemical injection
  • Suitable for high flowapplications
  • High wear resistance indemanding conditions
  • High precision in a broad flowcontrol range (logarithmiccontrol scale)

Specifikat

Operation

Operation of the dosing station presents accurate supply of small volumes of reagents from the tank into the water flow line with a dosing pump. The dosing pump sucks the solution out of the reagent tank, and delivers its certain volume to the system.

A filter is installed at the suction valve of the dosing pump to prevent sediments from entering the pump resulting in its clogging.

Technical parameters

  • Dosing mode – constant
  • Nominal back pressure (Pnom) – 1.5 bar
  • Flow rate at Pnom – 7.5 L/h
  • Maximum back pressure (Pmax) – 3 bar
  • Flow rate at Pmax – 6.5 L/h
  • Volume of one injection – 0.72 mL
  • Injection frequency – 0..150 injections/min
  • Suction height (max) – 1.5 m
  • Noise level – 74 dBA
  • Dosing pump power – 16 W
  • Power supply – 230 V, 50 Hz
  • Temperature limit within the premises – 0…45 °С
  • Temperature limit during storage / transportation – °С -10…+50 °С
  • Temperature of dosing solutions – 0..50 °С
  • Material of components which contact with the dosing substance – FPM (Viton® B) or EPDM
  • Reagents tank volume -60 L
  • Reagents tank dimensions (diameter x height) – 370×640 mm

Components

  • EMEC FACO dosing pump
  • Foot filter with suction valve
  • Injection valve
  • Set of tubes for connection
  • Reagent solution tank

Download

Produkte te ngjashme

BF1665TC Backwash filter assy 16×65, 1″ TC valve

BF1665TC

BF1465TC Backwash filter assy 14×65, 1″ TC valve

BF1465TC

BF1354TC Backwash filter assy 13×54, 1″ TC valve

BF1354TC

BF1252TC Backwash filter assy 12×52, 1″ TC valve

BF1252TC

BF1054TC Backwash filter assy 10×54, 1″ TC valve

BF1054TC

PP melt blown sediment filter 2.5″×10″ 1 micron

PP melt blown sediment filter BB10 4.5″×10″ 5 micron

CPV45105ECO

PP melt blown sediment filter BB20 4.5″×20″ 5 micron

CPV45205ECO

Ecosoft RF4872CE2 water softener assy

RF4872CE2

RF4272CE2 Softener assy w/o media 42×72, 2″ CE valve

RF4272CE2

RF3672CE2 Softener assy w/o media 36×72, 2″ CE valve

RF3672CE2

RF3072CE15 Softener assy w/o media 30×72, 1.5″ CE valve

RF3072CE15

RF2472CE15 Softener assy w/o media 24×72, 1.5″ CE valve

RF2472CE15

RF2162CE125 Softener assy w/o media 21×62, 1.25″ CE valve

RF2162CE125

RF1665CI Softener assy w/o media 16×65, 1″ CI valve

RF1665CI

RF1465CI Softener assy w/o media 14×65, 1″ CI valve

RF1465CI

RF1354CI Softener assy w/o media 13×54, 1″ CI valve

RF1354CI

RF1252CI Softener assy w/o media 12×52, 1″ CI valve

RF1252CI

RF1054CI Softener assy w/o media 10×54, 1″ CI valve

RF1054CI

RF1665CE Softener assy w/o media 16×65, 1″ CE valve

RF1665CE

FORMULARI I KËRKESËS: Dosing pump kits