EMEC FACO basic dosing pump set, 60 L

Operation

Operation of the dosing station presents accurate supply of small volumes of reagents from the tank into the water flow line with a dosing pump. The dosing pump sucks the solution out of the reagent tank, and delivers its certain volume to the system.

A filter is installed at the suction valve of the dosing pump to prevent sediments from entering the pump resulting in its clogging.

Technical parameters

• Dosing mode – constant
• Nominal back pressure (P_nom) – 1.5 bar
• Flow rate at P_nom – 7.5 L/h
• Maximum back pressure (P_max) – 3 bar
• Flow rate at Pmax – 6.5 L/h
• Volume of one injection – 0.72 mL
• Injection frequency – 0..150 injections/min
• Suction height (max) – 1.5 m
• Noise level – 74 dBA
• Dosing pump power – 16 W
• Power supply – 230 V, 50 Hz
• Temperature limit within the premises – 0…45 °С
• Temperature limit during storage / transportation – °С -10…+50 °С
• Temperature of dosing solutions – 0..50 °С
• Material of components which contact with the dosing substance – FPM (Viton® B) or EPDM
• Reagents tank volume -60 L
• Reagents tank dimensions (diameter x height) – 370×640 mm

Components

• EMEC FACO dosing pump
• Foot filter with suction valve
• Injection valve
• Set of tubes for connection
• Reagent solution tank