Search

FILMTEC XLE-440

KODI: XLE440

FILMTEC XLE-440 Membrane element

Parametrat

Kapaciteti depërtues

53

m³/h

Rikthimi

8,6

%

Maximum TDS

41

mg/L

Kërkesa për rrjedhje ndikuese

99,0

m³/h

Presioni operimit

41

bar

Konsumi i energjisë

45

kw

Parametrat

name

00

mm

Dow Filmtec™ XLE-440 is a high-performance reverse osmosis element with low energy consumption. Suitable for purification of water with medium level of mineralization. It provides high quality water at low operating costs.

The Dow Filmtec™ XLE-440 membrane element operates at pressure minimal for reverse osmosis, by this reducing energy consumption.

Tiparet kryesore

  • Dow Filmtec™ membrane (USA) is the world standard for water purification
  • Clean water for business – 53 000 liters of water of stable quality per day
  • High energy efficiency due to low operating pressure
  • Large active surface of ​​the element provides higher productivity
  • Automated high-precision production makes it possible to obtain elements with maximum active surface

Specifikat

Technical data

  • Nominal active surface – 41 m²
  • Operating pressure – 8.6 bar
  • Permeate volume – 53 m³/day
  • Stabilized salt rejection – 99.0 %
  1. Permeate consumption and salt (NaCl) rejection are indicated for the following test conditions: 2 000 mg/L NaCl, 25°C, pH 8, indicated pressure and 15% permeate recovery.
  2. Flow rates of permeate for every specific element might vary, but will not fluctuate by more than 15% from the indicated values.

Operating conditions

  • Maximum operating water temperature – 45 °С
  • Maximum operating pressure – 41 °С
  • Maximum pressure drop – 1.0 bar
  • pH range, operational mode – 2…11
  • pH range, chemical cleaning mode – 1…12
  • Maximum feed silt density index SDI < 5
  • Free chlorine tolerance – <0.1 mg/L

Maintenance

Before launch of the reverse osmosis system preliminary preparation of the membrane, refill of the elements, adjustment of the devices and other system checks should be performed.

Avoid any major pressure or flow surges inside the spiral-wound elements in the middle of launch, stop, cleaning etc. to avoid risk of damage infliction to the membrane. During the launch it is recommended to gradually switch the system from standstill to operational mode following the steps:

  • gradually increase feed water pressure during 30-60 seconds
  • operational rate of the flows should be developed gradually during 15-20 seconds
  • permeate obtained within the first hour of operation is discharged

Important information

  • After the initial soaking always keep the elements wet.
  • To prevent biofouling during long operation breaks it is recommended to submerge the membrane elements into preservative solutions.
  • Maximum pressure drop along the full length of the housing makes 2.1 bar.

Download

Produkte te ngjashme

BF1665TC Backwash filter assy 16×65, 1″ TC valve

BF1665TC

BF1465TC Backwash filter assy 14×65, 1″ TC valve

BF1465TC

BF1354TC Backwash filter assy 13×54, 1″ TC valve

BF1354TC

BF1252TC Backwash filter assy 12×52, 1″ TC valve

BF1252TC

BF1054TC Backwash filter assy 10×54, 1″ TC valve

BF1054TC

PP melt blown sediment filter 2.5″×10″ 1 micron

PP melt blown sediment filter BB10 4.5″×10″ 5 micron

CPV45105ECO

PP melt blown sediment filter BB20 4.5″×20″ 5 micron

CPV45205ECO

Ecosoft RF4872CE2 water softener assy

RF4872CE2

RF4272CE2 Softener assy w/o media 42×72, 2″ CE valve

RF4272CE2

RF3672CE2 Softener assy w/o media 36×72, 2″ CE valve

RF3672CE2

RF3072CE15 Softener assy w/o media 30×72, 1.5″ CE valve

RF3072CE15

RF2472CE15 Softener assy w/o media 24×72, 1.5″ CE valve

RF2472CE15

RF2162CE125 Softener assy w/o media 21×62, 1.25″ CE valve

RF2162CE125

RF1665CI Softener assy w/o media 16×65, 1″ CI valve

RF1665CI

RF1465CI Softener assy w/o media 14×65, 1″ CI valve

RF1465CI

RF1354CI Softener assy w/o media 13×54, 1″ CI valve

RF1354CI

RF1252CI Softener assy w/o media 12×52, 1″ CI valve

RF1252CI

RF1054CI Softener assy w/o media 10×54, 1″ CI valve

RF1054CI

RF1665CE Softener assy w/o media 16×65, 1″ CE valve

RF1665CE

FORMULARI I KËRKESËS: FILMTEC XLE-440