Permeate flushing assembly for Ecosoft MO2, MO3 and MO4 8″ RO systems

The product is used in the following cases

• Insufficient supply water flow capacity for normalmembrane flush
• Longer membrane service life before CIP is required,especially on difficult feed water analysis
• Supply water treatment process can be sized to a smallerflow capacity absent the peak flow demand duringmembrane flush

*Ecosoft industrial reverse osmosis systems have built-inflush ports for the flushing assembly connection

Components

• Motorized valve
• PVC piping assembly with PVC check valve
• Pipe clamp and fasteners
• Installation and connection instructions

‍

WARNING! To flush the membranes with permeate, it is necessary to use a purified water pump with sufficient capacity (according to the technical characteristics of the reverse osmosis system).The pump must be connected to the flushing unit with a permeate pipe of at least the nominal diameter of the flushing unit.