Permeate rinsing/blending option for MO6500 and MO12000

Applications

When set up for water blending, the product allows to blend water from any stage of the water treatment process to the RO permeate.

The product can also be set up for permeate flushing of membranes in the following cases:

• insufficient supply water flow capacity fonormal membrane flush
• longer membrane service life before CI is required, especially on difficult feed water analysis
• supply water treatment process can be size to a smaller flow capacity absent the peak flow demand during membrane flush

Components

• Solenoid valve
• 30…240 L/h rotameter
• Piping assembly
• Mounting bracket
• Installation and use manual

Physical parameters

• Connection port size -1/2″
• Approx.weight (packaged) – 1.5 kg
• Dimensions (W × D × H)* – 0.38 × 0.30 × 0.23 m

* Dimensionsmay vary ± 5%

‍

WARNING! Please note that the product can only be set up for either water blending or permeate flushing, but not both! The set is delivered as a separate product to be fitted on an RO system during installation / startup.